(866) 599-6512

Thursday, April 30, 2020

The New CDI VAMP-PB and PAC-PB will really push your buttons!

The new industrial Stainless Steel VAMP-PB Displays and industrial Stainless Steel PAC-PB Panel PCs from Computer Dynamics(CDI) consist of a rugged Stainless Steel enclosure, Projected Capacitive touchscreen, and integrated push buttons right on the front of the unit.
Push-buttons bring control and indication directly to the work area, eliminating wasted movement and increasing productivity. In addition, the physical buttons are especially needed for critical tasks like emergency shutdowns. When an emergency situation occurs, we don’t want to waste time navigating through HMI screens but a simple and quick way to shut down the process is needed. In terms of machine integration, push-button devices are easy to install and wire, and straightforward for understanding their function and use. The integration of these buttons allows for faster wiring and reduced project cost.
Other features include
  • Flat, easy-to-clean surface
  • SUS 316 / AISI 316 stainless steel for Chemical and Food & Beverage industries
  • Rotary switch adjustments to dial in different touch modes for Hand/Rain/Glove application
Stainless Steel PC

How To Clean and Disinfect Your Touchscreen

The spread of the novel coronavirus COVID-19 has caused everyone to re-think our daily life and hygiene. From personal hygiene to disinfection and cleaning procedures in public areas people are more concerned with staying clean and germ-free. Now it’s more important than ever to keep everything, including hardware clean and sanitary. While it is primarily spread from person-to-person, it’s also possible that a person can contract the virus by touching a contaminated surface or object, then touching their own mouth, nose, or eyes.

While sanitizing is essential, it’s also important to follow the correct procedures for cleaning your touchscreens in order to avoid damage. Here, Computer Dynamics outlines some useful advice on how to clean our products, and what cleaning agents are safe to use. Cleaning and disinfecting are two important steps to prevent the spread of communicable diseases and to protect staff and visitors from contracting and passing infections.


1. To prepare for cleaning the product make sure the device is not running and not connected to power in any way.
2. We recommend using an industrial grade paper towel, that is stable when wet and does not leave lint.
3. Please use a spray bottle to apply a mist of disinfection solution in a fine layer, we recommend using Isopropyl Alcohol 70% for disinfection. Avoid highly concentrated alcohol (greater than 70% concentration), non-diluted bleach or ammonia solutions, as these may cause discoloration.
4. Wear single-use silicone gloves and face mask when disinfecting the devices to avoid any cross contamination. Do not forget to always wash your hands with water and soap before and after wearing gloves.

Cleaning and Disinfecting 

1. Spray the device from all sides and wipe the solution off with the paper towel, especially in the edges and corners.
2. Do not get liquids inside the unit or spray the product directly. Do not re-use the paper towel for the next devices to avoid cross contamination.
3. Let the device stand for half an hour to let the alcohol residue evaporate before using the device again.
4. Discard the face mask, towels used and gloves appropriately as medical waste.